Extra Hyaluronic Acid Filler

What is it?

Extra Hyaluronic Acid Fillers have a series of Hyaluronic Acid Filler for Face and Body. The Hyaluronic Acid used to make these fillers are sourced from a non-animal origin and will no longer require skin tests.

These fillers are created using an innovative technology named Third-Step Cross-Linking (TSC) and microbeads, making it easier for doctors to mold the filler to fit for the client’s request. The filler itself is also stable enough to be able to keep its shape after using it for a long time. 

Extra Hyaluronic Acid Fillers lasts for a very long time and can even last for up to 3 years due to TSC Technology. These series of fillers have an increased concentration of around 50mg as compared to the usual 20mg for a stronger molding force. 

These fillers should be kept in a room with 1° – 30°C and away from direct sunlight to render great results.

For Body

Extra Hyaluronic Acid Filler H

Made using Third-Step Cross-Linking (TSC), Extra Hyaluronic Acid Filler H has an improved viscosity and moldability for easy molding during the procedure. This filler has a particle size of 400μm with a 20-21G 50mm Cannula. It’s excellent for body contouring. 

Extra Hyaluronic Acid Filler S

Made using Third-Step Cross-Linking (TSC), Extra Hyaluronic Acid Filler S has an improved viscosity and moldability for easy molding during the procedure. This filler has a particle size of 250μm with a 21-23G 50mm Cannula. It’s excellent for body contouring. 

For Face

Extra Hyaluronic Acid Filler I

Made using Third-Step Cross-Linking (TSC), Extra Hyaluronic Acid Filler I have an improved viscosity and moldability for easy molding during the procedure. This filler has a particle size of 200μm with a 30G 13mm UTW Needle (Ultra Thin Wall). Extra Hyaluronic Acid Filler I is great for Fine wrinkles around the eye rim and sides of your mouth and is injected at the Superficial Dermis and Mid Dermis. 

Extra Hyaluronic Acid Filler II

Made using Third-Step Cross-Linking (TSC), Extra Hyaluronic Acid Filler II has an improved viscosity and moldability for easy molding during the procedure. This filler has a particle size of 350μm with a 27G 13mm UTW Needle (Ultra Thin Wall). Extra Hyaluronic Acid Filler II is great for nasolabial fold, frown lines as well as lips. This filler is injected at the Mid Dermis and Deep Dermis.

Extra Hyaluronic Acid Filler III

Made using Third-Step Cross-Linking (TSC), Extra Hyaluronic Acid Filler III has an improved viscosity and moldability for easy molding during the procedure. This filler has a particle size of 450μm with a 25G 13mm UTW Needle (Ultra Thin Wall). Extra Hyaluronic Acid Filler III is great for cheekbones, nose, and chin. This filler is injected at the Deep Dermis & Subcutaneous layer.

Why Choose Extra Hyaluronic Acid Fillers?

Uses Third-Step Cross-Linking (TSC)

Extra Hyaluronic Acid Filler uses Third-Step Cross-Linking (TSC) and microbeads to make the filler easy to mold.

High Viscosity

Due to the innovative technology these fillers have used, it has a strong molding force to make it easy to mold and keep its shape for a long time.

Extra Hydrophilic

Extra Hyaluronic Acid Filler is very hydrophilic and absorbs moisture more to keep the shape and volume of the filler at its best.